Don’t throw away the pump; you can always give it a fresh start. While you are doing maintenance for your AeroGarden, cleaning its pump is one of the top priorities. However, not everyone feels comfortable diving inside the garden, sanitizing the pump is then not always an easy task. Here is a detailed guide on how to clean AeroGarden pump to help you out.
- Why Should You Clean Your AeroGarden Pump?
- When Should You Clean Your AeroGarden Pump?
- How To Clean AeroGarden Pump?
- Prepare For The Cleanup
- Sanitize Your AeroGarden Pump
- Reassemble Your AeroGarden
Why Should You Clean Your AeroGarden Pump?
Why Should You Clean Your AeroGarden Pump?
They’re all good reasons for why cleaning the AeroGarden pump is a should-do. Here are how you will benefit from keeping healthy.
Keep your AeroGarden productive
A clean pump does really help keep your AeroGarden works better. It allows for stronger air and water circulation, providing a healthy environment for all living creatures in the garden. On top of that, a high-performance pump enables you to better take care of your plants with dirt-free and safe indoor hydroponic garden techniques.
A good pump will remove the nutrient residues or plant roots, which keep them away from clogging your AeroGarden. Without clogs, everything about your farming will be a bliss.
Reduce pump noise
What’s the point of having an AeroGarden, but it cannot really give you the peace of mind? As the pump is well sanitized, and the clogs are removed, there’ll be less noise during the operation. If your pump starts making noise while running, you know it’s time to give it a good clean.
Extend AeroGarden’s lifespan
Taking care of your AeroGarden mostly involves eliminating the chances of harmful bacteria and pathogens affecting your plants. Cleaning the garden’s surface is never enough; maintaining your pump will help your garden stay clean for a longer time.
When Should You Clean Your AeroGarden Pump?
There are four main approaches in timing your cleanup for the AeroGarden pump. And here are they.
Most AeroGarden pumps need a thorough cleanup after every time the garden reaches the end of its life. This is to make sure there’ll be less or no nutrients or plant roots clogging the water flow. Cleaning the AeroGarden pump is a necessary prep work to ready your garden for its next life.
Before you start planting your AeroGardens with some new plants, it’s also crucial to clean the pump. A fresh AeroGarden is the best start for your new plants. It also reduces the time of familiarizing the plant to a new living environment.
When there’s noise
The increasing noise from the pump can be a sign of it being clogged. The residues start building up inside the pump, thus coming the noise. Even if the water still seems clean, it’s a good idea to take a look at the pump. Sometimes it just needs a bit of your care, not a replacement.
Most recommended frequency – every week.
Most AeroGarden, regardless of its size and sanitary status, should be cleaned every once a week. For a standard garden, the top part will get dirty after about one week. And then the dirt will start growing deeper below, that’s when you should take action for the maintenance.
How To Clean AeroGarden Pump?
How To Clean AeroGarden Pump?
Giving the pump a fresh start will no longer be a daunting task if you follow these simple steps for cleaning an aerogarden. Let’s dive right in!
Prepare For The Cleanup
Before jumping into cleaning the pump, here is the preparation checklist for Aero gardeners of all levels.
Vinegar or bleach bath
Either bleaches or vinegar are all good to clean your AeroGarden pump. In most cases, people actually prefer using vinegar as it is not a harsh chemical while still having the effect of a natural cleanser.
And if you are looking for an eco-friendly approach to clean your AeroGarden pump, vinegar solution should be the choice. Even though the smell may not be pleasant for everyone, it fades away quickly and becomes unnoticeable.
A large plastic container will be in need to immerse all parts of the pump into vinegar or bleach solution. For the best result, they should be completely submerged into the solution. Make sure you have a plastic bowl that’s big enough to contain the parts while still having space for the liquid.
You will need some soft towels to wipe the small pieces that cannot be submerged into the solution. Such components as touch screen, light hood, and meter are the examples. Soft towels are a great help to thoroughly free your garden from bacteria and pathogens both inside and outside.
For the cleanup, you will need to disassemble the garden. Some paper towels should be used to clean the unreachable spots below the growing area or around the seed pods. Be gentle on the exposed roots; you don’t want to damage them while wiping around with the towels.
Sanitize Your AeroGarden Pump
Now, as you have everything you need for the cleanup, follow these steps of the Aerogarden cleaning and sanitization process.
Unplug your garden
The very first thing to do before you can start cleaning the pump is to unplug your AeroGarden. Then, place it near the large plastic bowl to make it easier to transfer the parts to the liquid solution later.
Disassemble your garden
First, make sure you disconnect the light hood from the AeroGarden. Next, the bowl must also be dismantled properly from inside the base. From there, you can remove all the parts that need cleaning.
Make the distilled white vinegar or bleach solution.
In a large plastic bowl, you can make the cleaning solution using either bleach or vinegar bath. Both solutions need a gallon of warm water. Then, mix it with one cup of bleach or one cup of white vinegar (water and vinegar, or water and chlorine bleach). But remember not to blend bleach with vinegar; just choose one to go with warm water.
Make sure the solution completely soaks all disassembled parts, then use a wooden spoon or chopstick to stir them together. The stir enables the liquid to penetrate all corners of the AeroGarden parts. The solution will need around 20 – 30 minutes to kill the root pathogens and bacteria. After that, let it rest accordingly.
Sanitize the garden bowl
The AeroGarden bowl should also be cleaned alongside the pump. As the motors run to form the hydroponic indoor gardens, there’s a constant water flow through the bowl. This mechanism, on the other hand, promotes the growth of bacteria and molds.
In order to clean it, empty the bowl and fill the bowl with ¾ cup of warm water and ½ cup of bleach or white vinegar. Now, turn on the motor and let the solution run through the bowl in about five minutes. After that, turn off the motor, rinse the entire bowl with clean water, and add distilled water if necessary.
Wipe down other surfaces of the garden
There are some parts of the AeroGarden with surfaces that cannot be soaked into the solution. It’s when the soft towels come into play. Dip a towel into the solution and wipe these parts.
More importantly, when working on the light hood, you need to be very gentle with it; otherwise, the LED lights will break at once. Done with the wiping, give them time to dry completely.
Clean the filter
To clean the pump filter, remove it from the stand and scrub it with a brush, which will remove the redundant roots. After that, use a soft towel or a wet sponge to wipe the stand.
Take the parts out of the solution.
After 20 – 30 minutes of soaking, it’s now time to take all the parts away from the solution. As you remove them, rinse them again with fresh water. Dry them well after rinsing; and then place them on the towel will accelerate the drying.
Reassemble Your AeroGarden
When all the parts are dry and clean, follow the instruction manual to reassemble your AeroGarden. Once the AeroGarden is back on its form, it should run normally. You can now start planting new seedlings or plants, or put your growing plants back into it.
However, should you be in a situation where the AeroGarden pump does not start, there are a few things you should check again.
- Is your AeroGarden properly plugged into the wall socket?
- Is the bowl securely assembled to the base?
- Are the Contact Strips corroded? (Check it when the AeroGarden is unplugged). If yes, wash them with a toothbrush and white vinegar.
- Is your AeroGarden in the Pump-Off cycle? If yes, switch it on by press Select on the Control Panel until it is “Salad Green.” For the PRO and Deluxe models, set it to the 24-hour cycle.
We have just walked through the complete guide on how to clean AeroGarden with vinegar or bleach. Long story short, sanitizing your AeroGarden pump is a necessary thing to do, as it provides a healthy environment for both existing plants and new seedlings. Keep it free from molds, harmful bacteria or pathogens; your AeroGarden will give you a bliss.
If you want the AeroGarden system to run smoothly, don’t ignore the pump. Give it good care, and you will enjoy the work of your labor.